Copeland XWEB EVO CVE-2026-124010 (CVSS 9.8) Exploited Within Hours: Supermarket Refrigeration Supervisors Give Up Root in One Request, and Copeland Will Not Patch

Attackers began hitting two of 14 newly disclosed flaws in Copeland's end-of-life XWEB EVO refrigeration supervisors less than two hours after publication, including an unauthenticated root command injection that will never be patched.
Attackers began probing internet-facing Copeland (Dixell) XWEB EVO refrigeration supervisors less than two hours after 14 new vulnerabilities in the product were published, and two of them are now confirmed as exploited in the wild. The worst, CVE-2026-124010 (CVSS 9.8), lets anyone who can reach the web interface run commands as root with a single unauthenticated request.
There will be no fix. Copeland ended software support for the entire XWEB EVO family on 16 March 2026, and its end-of-support bulletin states plainly that security patches for newly identified vulnerabilities will no longer be released. For the supermarkets, cold stores, pharmacies and food distributors still running these boxes, the only real options are to take them off the internet or replace them.
What Happened
XWEB EVO is a web-based supervisor that sits above the refrigeration controllers in a store or warehouse: it logs temperatures, raises alarms and lets technicians change set points and defrost cycles remotely. Researchers at VulnCheck reported 14 flaws to Copeland's product security team on 17 October 2026. On 10 November, Copeland pointed to the product's end-of-support status, and VulnCheck, acting as CVE numbering authority, published the 14 identifiers. The CVE records went live at 00:18 Mauritius time on 13 November (20:18 UTC on 12 November).
The first exploitation followed almost immediately:
- CVE-2026-124014 (CVSS 9.1), an unauthenticated write to the system configuration file, was first hit at 02:00 Mauritius time on 13 November (22:00 UTC on 12 November), about 1 hour 40 minutes after the record went live and before any public proof of concept existed. The researchers logged 125 hits by 10:16 Mauritius time (06:16 UTC), 87 of them in the first hour, from a single commodity VPS address.
- CVE-2026-124010, the root command injection, was first probed at 07:41 Mauritius time (03:41 UTC) on 13 November. The four probes seen only ran the
idcommand, a typical check that a target is vulnerable, and no second-stage payload was observed. The source address had sent 189 requests touching nine different CVEs in the previous 90 days.
The researchers describe both sources as opportunistic scanners and say the activity is not linked to the October sabotage of refrigeration controllers in about 700 French supermarkets, which France attributed to Iran's IRGC. They do note that CERT-FR named Copeland and Dixell XWEB among the controller families compromised in that campaign, which shows these devices are already a known target.
Technical Details
The flaws fall into two groups, depending on firmware age.
Legacy builds (the pre-2021 Lua-based interface, tested on 5.2.3):
- CVE-2026-124010 (CVSS 9.8): the setuid-root CGI program
xwconsole.cgipasses a request parameter straight topopen()without authentication. NVD lists versions before 5.6.2 as affected. - CVE-2026-124002 (CVSS 9.8): the login page runs the submitted username as a shell command before it checks the password.
- CVE-2026-124004 (CVSS 9.8): a hardcoded backdoor password for the Administrator account.
- CVE-2026-124003: the
wluainterpreter that runs the web handlers is setuid root, so every injection in a Lua page becomes a root injection. - CVE-2026-124015: a password reset in
users.luathat skips session checks. - CVE-2026-124007, -124008, -124009: further command injections in the password field, template handler and backup mount handler.
Current firmware (5.8.8, the last release):
- CVE-2026-124005 (CVSS 8.1): the daily "code of the day" Administrator password is computed only from the device's MAC address and the date, with no secret. An attacker can calculate it offline.
- CVE-2026-124011: an unauthenticated
sysinfo.luapage reveals exactly that MAC address and the device clock. - CVE-2026-124012: the Administrator account accepts the daily code alone.
- CVE-2026-124006: the Linux root password is a fixed prefix plus the same daily code.
- CVE-2026-124013: an authenticated command injection in an API import action.
Chained, the 5.8.8 issues mean upgrading to the latest firmware removes the legacy injection bugs but still leaves a predictable path to administrator and root access. The exploited configuration write, CVE-2026-124014, is listed in the NVD record as affecting versions 4.3.0 through 5.8.8; it lets an attacker tamper with /etc/xwebconfig.json or push the device into an unconfigured state, cutting off monitoring and alarms.
Who Is Affected
Any organisation running an XWEB EVO supervisor reachable from the internet or from an untrusted network. The researchers counted about 1,663 XWEB EVO hosts with one internet search engine and roughly 1,960 in a separate refrigeration exposure survey, far more than the newer XWEB Pro line. Many of the exposed devices still run legacy builds.
These units are often installed and managed by refrigeration contractors rather than the store's IT team, so they may be missing from asset inventories entirely. The newer XWEB Pro models are a separate product with their own set of 23 flaws, which Copeland fixed and CISA published in February 2026.
Patch Status
- No security fixes for XWEB EVO. Copeland's March 2026 bulletin ended software maintenance on 16 March 2026, including "release of security patches for identified vulnerabilities".
- Copeland told customers to keep the devices off the public internet and update to the latest software, and it says it has contacted affected customers. Versions 5.6.2 and later remove CVE-2026-124010, but 5.8.8 still contains the predictable-password and configuration flaws.
- The vendor's recommended long-term action is migration to XWEB Pro.
- As of today, CVE-2026-124010 and CVE-2026-124014 are listed in VulnCheck's own exploited-vulnerability catalogue but not in CISA's KEV catalogue.
What To Do Now
- Find every XWEB EVO unit, including those installed by contractors. Check external exposure from outside your network.
- Remove direct internet access. Put the supervisor behind a VPN with MFA or a jump host, and restrict access to known technician addresses.
- Upgrade legacy units to the latest available EVO firmware as a stopgap if you cannot replace them right away, accepting that 5.8.8 is still vulnerable.
- Hunt for the observed activity in web or proxy logs: unauthenticated POST requests to
config.lua, GET requests to/cgi-bin/xwconsole.cgicarrying anshparameter, and traffic from 202.61.138[.]117 and 177.4.12[.]11. - Treat any exposed unit as possibly compromised. Check configuration, set points, alarm settings and user accounts against a known good state, and verify that alarm notifications still reach staff.
- Budget the move to XWEB Pro and fully patch it to the February 2026 fix.
# Example: search web/proxy logs for the exploited endpoints
grep -E "config\.lua|xwconsole\.cgi" /var/log/nginx/access.log
Why It Matters
This is the end-of-life problem in its purest form: a device that controls physical cold chains, a public list of root-level bugs, exploitation within two hours, and a vendor that has formally stopped patching. The October attacks in France showed that refrigeration supervisors can be used to spoil stock and even start fires. With the vulnerability details now public and scanners already sweeping for them, any XWEB EVO left on the internet should be treated as an open door.
